PhD defense of Mouncif BELMOUHOUB - 16.12.2026
"Développement de couches minces nanocomposites conductrices de type P pour l'électronique flexible et transparente"
"Développement de couches minces nanocomposites conductrices de type P pour l'électronique flexible et transparente"
Transparent conducting oxides (TCOs) are key materials for a wide range of optoelectronic
applications. While n-type TCOs currently exhibit high performance, the development of p-type
materials combining optical transparency with electrical conductivity remains a major challenge. In
this context, this thesis focuses on the development of a novel p-type nanocomposite architecture
combining a two-dimensional network of Cu₂O nanowires with a CuCrO₂ thin film. The objective is to
exploit the complementary properties of these two materials through an architecture combining the
characteristics of a percolating nanowire network with those of a transparent conducting oxide thin
film.
The first part of this work was devoted to the development and optimization of Cu₂O nanowire
synthesis. Two fabrication routes were investigated: a hydrothermal synthesis derived from Fehling’s
solution and a route based on the oxidation of copper nanowires. Particular attention was paid to the
hydrothermal approach in order to establish relationships between the experimental conditions and
nanostructure formation. The influence of temperature, precursor concentration, and reactionmedium pH was systematically investigated. In particular, exploring a pH range from 11.12 to 11.98
highlighted the critical role of this parameter in nanowire formation and morphological control.
Following their assembly into two-dimensional networks, their thermal and environmental stability
was investigated under different annealing atmospheres. These studies were complemented by
electrical characterization of both individual nanowires and the resulting networks.
In a second stage, the deposition conditions of CuCrO₂ by aerosol-assisted metal-organic chemical
vapor deposition (AA-MOCVD) were revisited and reoptimized at a temperature of 325 °C to achieve
conformal and homogeneous coatings. The resulting materials were subsequently subjected to
comprehensive morphological, structural, and functional characterization to investigate the
relationships between deposition conditions and material properties.
3
The combination of these two optimized processes ultimately enabled the fabrication of Cu₂O/CuCrO₂
nanocomposites. The influence of several architectural parameters was investigated, including
nanonet morphology and nanowire network density with respect to the percolation threshold. Finally,
the influence of the CuCrO₂ coating thickness and film composition was explored to assess their effects
on the properties of the resulting nanocomposite.
Overall, this work enabled the optimization of a simple hydrothermal route for the synthesis of Cu₂O
nanowires, with potential for large-scale production, while providing further insight into their
formation mechanisms, stability, and overall properties. It also demonstrated the feasibility of a novel
Cu₂O/CuCrO₂ nanocomposite architecture and identified several key parameters governing its
fabrication and optimization, thereby opening new perspectives for the development of p-type
transparent conducting materials.
|
Directeur de recherche |
T.Fix |
Laboratoire ICube (CNRS, Université de Strasbourg), Strasbourg 67000 (FRANCE). |
Rapporteur |
|
Directeur de recherche |
M.Bechelany |
Institut Européen des Membranes (IEM, CNRS, Université de Montpellier), Montpellier 34000 (FRANCE). |
Rapporteur |
|
Maître de conférences |
A.Sekkat |
Laboratoire de Génie Chimique (LGC, CNRS, Toulouse INP), Toulouse 31000 (FRANCE). |
Examinateur |
|
Professeur des universités |
F.Volpi |
Laboratoire SIMaP (CNRS, Grenoble INP - UGA), Saint-Martin-d'Hères 38402 (FRANCE). |
Examinateur |
|
Maîtresse de conférences |
C.Ternon |
Laboratoire des Matériaux et du Génie Physique (LMGP, CNRS, Grenoble INP - UGA), Grenoble 38000 (FRANCE). |
Co-encadrante de thèse |
|
Ingénieure CEA |
M.Braccini |
CEA-Liten (Commissariat à l'énergie atomique et aux énergies alternatives), Grenoble 38054 (FRANCE). |
Co-directrice de thèse |
|
Chargé de recherche |
J.L Deschanvres |
Laboratoire des Matériaux et du Génie Physique (LMGP, CNRS, Grenoble INP - UGA), Grenoble 38000 (FRANCE). |
Directeur de thèse |